 |
|
JD CONTROLS - Manufacturer & Exporter of Industrial Valves.
|
|
Single Piece Design
Flanged End Connection
Hand Lever / Gear / Pneumatic Operation
|
|
J. D. Controls offers a range of Flush Bottom Ball Valves. J. D. Ball Valves have been proven in service application for over 10 years J. D. Controls mfg. High performance Flush Bottom Ball Valve as per international design to get 100% Client Satisfaction and repeat order with total interchangeability, superior quality, workmanship & service. Generally Flush Bottom Ball Valve body is modified by adding Inlet oversize flanges. As example: 2" x 3" Flush Bottom Ball Valve has the nominal bore of 2" (DN 50), the Inlet flange (Vessel Side) size is 3"(DN 80) and outlet flange size 2. It allows enough space for bolting clearance & insulation at vessel bottom flange.
|
|
Flush Bottom Ball Valve
|
 |
|
 |
|
At the time of enquiry and order below technical details & dimensions are must required, which is as under:
-
Center Bottom hole of Vessel
-
Vessel Bottom Flange Pad Thickness + Vessel Plate Thickness
-
Vessel Bottom Flange Drilling Standard
Generally standard Flush Bottom Ball Valves are used in carbon steel and different types of stainless steel materials. Other special materials are available upon special request.
J. D. Flush Bottom P.T.F.E. seated Ball Valves gives Zero Leakage, Tight Shut-Off and Low Torque with easy smooth operation at temperature ranging from -200 C. to +2200 C. Electro-Polished, Buff Finish & Ultra clean valve also provided for Food & Pharmaceutical Industries on request.
VALVE OPERATION: J. D. Flush Bottom Ball Valves are generally supplied with manual hand lever or gear unit operated, depending on valve size. J D also offering Ball Valves with either Pneumatic operated for automation.
WIDE RANGE OF BODY SEAT, SEAL & PACKING: J. D. Flush Bottom Ball Valves are also available with different type of Seat, Seal & Packing material such as P.T.F.E. (Virgin) / Glass Filled P.T.F.E. / Carbon Filled P.T.F.E. / Graphite (Grafoil) / PEEK to suit special requirement of client. |
|
Design & Testing
International Standard |
Top |
|
|
Valve Design
|
: |
BS 5351 / ANSI B 16.34 / API 6D |
|
|
Pressure Testing
|
: |
BS 6755 Part II / API 598 / API 6D |
|
|
Face To Face
|
: |
Mfg. Standard |
|
|
Flange Drilling
|
: |
ANSI B 16.5 / BS 10 Table / DIN / IS 6392 |
|
|
Size Range
|
: |
x 1 To 6 x 8 |
|
|
Material of
Construction: |
Top |
|
Stem
|
Ball Seat / Gland Seal / Stem Seal |
-
AISI 410 (S.S. 410 13% Cr. Steel)
-
AISI 304 (S.S. 304)
-
AISI 316 (S.S. 316)
-
AISI 304L (S.S. 304L)
-
AISI 316L (S.S. 316L)
-
Alloy 20
AISI 410 (S.S. 410 13% Cr. Steel)
|
-
P.T.F.E. Virgin
-
P.T.F.E. Glass Filled
-
P.T.F.E. Carbon Filled
|
|
|
|
|
J D Controls : |
|
REGISTERED OFFICE |
|
8869/11,
1st Floor, Above Chirayu Surgical
Hospital,
Opp, Hotel Satluj, Naroda Road, KuberNagar
Patia,
Ahmedabad - 382340, Gujarat, INDIA. |
178, Ashirwad Estate,
Opp. Vijay Mill Fruit Market, Nr. Memco Cross Road, Naroda Road,
Ahmedabad – 380025, Gujarat, INDIA. |
|
|
|
|
|
