 |
|
Four Way Ball
Valves (Multiport Ball Valve) |
|
JD CONTROLS - Manufacturer & Exporter of Industrial Valves.
|
|
Single / Two / Three Piece Design, Full Bore / Regular (Reduce)
Bore
Two / Three / Four Way (Multiport), Floating / Trunnion Mounted
|
|
J. D. Controls offers a tremendous value in multi-port three and four way valves. Three Way / Four Way Ball Valves a Specialty of J.D. Controls, a leading manufacturer and supplier of Ball Valve and Actuation. We have a wide range of Three Way & Four Way Ball Valve in Carbon Steel, Stainless Steel, Cast Iron and others metal on special request. Our Three Way Ball Valve & Four Way Ball Valve selection covers Full Port & Regular (Reduce) Port, Flanged End, Screwed End, Socket Weld, Butt Weld (Welded Neck) End & Tri-Clover End with Manual Hand Lever, Gear or Pneumatic Operation.
|
 |
| Four Way Ball Valve, Flanged End |
|
|
|
J. D. Covers Size range for Multiport Ball Valve in Screwed / Socket / Butt Weld End from to 2 and in Flanged End from to 6, Pressure Rating up to 300#
J. D. P.T.F.E. seated Ball Valves gives Zero Leakage, Tight Shut-Off and Low Torque with easy smooth operation at temperature ranging from -200
C. to +2200 C. Electro-Polished, Buff Finish & Ultra clean valve also provided for Food & Pharmaceutical Industries on request. |
|
VALVE OPERATION |
|
J D Ball Valves are generally supplied with manual hand lever or gear unit operated, depending on valve size. J D also offering Ball Valves with either
Pneumatic or Electrical actuator operated for automation.
|
|
WIDE RANGE OF BODY SEAT, SEAL &
PACKING |
|
J D Ball Valves are also available with different type of Seat, Seal & Packing material such as P.T.F.E. (Virgin) / Glass Filled P.T.F.E. / Carbon Filled P.T.F.E. / Graphite (Grafoil) / PEEK to suit special requirement of client.
|
|
|
-
No Lubrication
-
Compact Design
-
Low Pressure Drop
-
Simplicity
|
|
Design & Testing
International Standard |
Top |
|
|
Valve Design
|
: |
BS 5351 / ANSI B 16.34 / API 6D |
|
|
Pressure Testing
|
: |
BS 6755 Part II / API 598 / API 6D |
|
|
Face To Face
|
: |
Mfg. Standard |
|
|
Flange Drilling
|
: |
ANSI B 16.5 / BS 10 Table / DIN / IS 6392 |
|
|
Butt Weld End
|
: |
ANSI B 16.25 |
|
|
Socket Weld End
|
: |
ANSI B 16.11 |
|
|
Screwed End
|
: |
ANSI B 1.20.1(BSP/NPT) |
|
|
Material of
Construction: |
Top |
|
Body / End Connector Piece |
Ball |
|
|
|
|
Stem
|
Ball Seat / Gland Seal / Stem Seal |
-
AISI 410 (S.S. 410 13% Cr. Steel)
-
AISI 304 (S.S. 304)
-
AISI 316 (S.S. 316)
-
AISI 304L (S.S. 304L)
-
AISI 316L (S.S. 316L)
-
Hast Alloy B / C
-
Alloy 20
|
-
P.T.F.E. Virgin
-
P.T.F.E. Glass Filled
-
P.T.F.E. Carbon Filled
-
Grafoil
|
|
|
|
|
J D Controls : |
|
REGISTERED OFFICE |
|
8869/11,
1st Floor, Above Chirayu Surgical
Hospital,
Opp, Hotel Satluj, Naroda Road, Kuber Nagar
Patia,
Ahmedabad - 382340, Gujarat, INDIA. |
178, Ashirwad Estate,
Opp. Vijay Mill Fruit Market, Nr. Memco Cross Road, Naroda Road,
Ahmedabad 380025, Gujarat, INDIA. |
|
|
|
|
|
