J D Controls mfg. High performance Ball Valve as per international design and standard to get 100% Client Satisfaction and repeat order with total interchangeability, superior quality, workmanship & service. These Ball Valves come in Single Piece (1/2 to 4) / Two Piece (1 to 8) as well as in Three Piece Design (1/2 to 12) to suit various critical, non-critical applications and pressure rating up to 1500 class in both full bore & regular (reduce) bore design.

J D P.T.F.E. seated Ball Valves gives Zero Leakage, Tight Shut-Off and Low Torque with easy smooth operation at temperature ranging from -20° C. to +220° C. Electro-Polished, Buff Finish & Ultra clean valve also provided for Food & Pharmaceutical Industries on request.

Single Piece Design Screwed End Ball Valve (Full Bore)

Three Piece Design Screwed End Ball Valve (Full Bore)

Single Piece Design Flanged End Ball Valve (Reduce / Full Bore)

Two Piece Design Flanged End Ball Valve (Full Bore)

Three Piece Design Flanged End Ball Valve (Reduce / Full Bore)

Three Piece Design Universal (Capsule) Hole Design Ball Valve (Full Bore)

Extended Pipe Nipple End Ball Valve

Ball Control Valve

Fire Safe Design : Floating / Trunnion Mounted:
J D Controls mfg. both Floating & Trunnion Mounted Ball Valves. In the floating ball design, where sealing takes place by allowing the Ball under pressure to move towards the downstream seat to effect tight seal. For higher sizes and pressure ratings Trunnion mounted ball valves are preferred by industry.

Valve Operation: J D Ball Valves are generally supplied with manual hand lever or gear unit operated, depending on valve size. J D also offering Ball Valves with either Pneumatic or Electrical actuator operated for automation. Wide Range of Body Seat, Seal & Packing: J D Ball Valves are generally supplied with manual hand lever or gear unit operated, depending on valve size. J D also offering Ball Valves with either Pneumatic or Electrical actuator operated for automation.